Learning Center
Short videos on choosing, installing, and maintaining the equipment we sell. Pick a topic below. Each video opens in a player on this page.
1:55The four pieces of information needed to spec an industrial fan.
0:47How to pick the synchronous motor speed for a belt drive fan.
1:40A walkthrough of the Hartzell Series 12 plug fan.
3:43Construction and features of fiberglass axial duct fans.
2:26Industrial fans used on food and dairy processing equipment.
1:13The Hartzell 5-year warranty on industrial fans.
5:03Hardware to check on a centrifugal fan before start-up.
3:25How to check fan bearing temperature and vibration.
6:39How to check drive alignment on a fan.
4:13How to check fan bearing alignment.
1:38Lubrication steps for fan bearings.
1:53How to store a fan so it installs trouble-free.
1:07An introduction to the Hunter Titan HVLS fan.
0:51How HVLS fans move warm ceiling air back down in winter.
1:38Impact testing on HVLS fan blades.
2:04What happens when a fork truck hits an HVLS fan.
5:26Step-by-step installation of a Titan HVLS fan.
3:03Where air curtains go and why buildings put them on open doors.
1:38How the air stream seals an open doorway.
0:16Fog shows the air seal across a doorway.
1:35Customer entrances, outdoor dining, and back-of-house doors.
1:44A low-profile unit sized for drive-thru windows.
3:49Installation steps for an industrial air curtain.
1:11Adjusting the nozzle after the unit is installed.
2:51First-time setup of the IntelliSwitch control.
3:12How Quick-Fit clamp-together duct goes together.
1:11Install speed compared with flanged duct.
1:21Adjusts duct line lengths from 12 to 67 in.
0:09A floor sweep that clamps into the duct line.