Overhead Exhaust Extraction Drops, Hose Reels, and Balancers
Overhead drops, hose reels, and balancers hang above the bay and come down to the tailpipe when you need them. They pull carbon monoxide and diesel fumes off the vehicle and keep the floor clear of hose between jobs.
We match the drop, reel, or balancer to your bay layout and the vehicles you service, sourced across multiple manufacturer lines instead of one catalog.
Have questions about your exhaust extraction system?
Where Overhead Drops Fit
Overhead drops work best where the vehicle parks in a known spot and the bay needs the floor kept clear.
A fixed drop or balancer sits over the stall and comes down to the tailpipe, while a reel on a rail follows the vehicle down a longer bay.
Source capture matters because carbon monoxide carries an OSHA limit of 50 ppm over an eight hour shift, and pulling exhaust at the tailpipe keeps it out of the air your crew breathes.
| Where you work | What fits |
|---|---|
| Single dedicated bay | A fixed overhead drop or spring balancer over the stall, dropped to the tailpipe and lifted out of the way between jobs |
| Long or drive-through bay | A hose reel on a rail or track system that follows the vehicle the length of the bay |
| Fire and fleet apparatus bays | Overhead drops that clear the bay fast on start up and reset on their own as the vehicle pulls out |
| Diesel service work | Source capture at the tailpipe, since diesel exhaust is a known human carcinogen and needs to leave the building, not settle in it |
Types of Industrial Centrifugal Blower Fans
Overhead Exhaust Extraction Equipment We Supply
We carry overhead drops, hose reels, and balancers built for vehicle exhaust, along with the nozzles and adapters that seal to the tailpipe. Most of these come from a single European line we represent, and you can see the full range on our manufacturer page.
| Equipment | What it does for your shop |
|---|---|
| Overhead drop hose | Hangs over the stall and pulls down to the tailpipe, then lifts clear so nothing sits on the floor between jobs |
| Spring balancer | Holds the hose at the height you set it and takes the weight off the connection so it stays put while the engine runs |
| Hose reel | Retracts the exhaust hose out of the way and feeds out only the length the job needs |
| Nozzles and tailpipe adapters | Seal to the tailpipe so the pull stays tight and exhaust does not leak back into the bay |
Why Order From RWA
We have specced and built ventilation since 1882, and overhead exhaust extraction is work we know bay by bay. You get a drop, reel, or balancer matched to the vehicles you service, not whatever one catalog happens to stock.
Every unit is backed by the manufacturer’s warranty.
Because we source across multiple manufacturer lines and spec in house, we can fit the system to your shop instead of bending your shop around the equipment. Call us at 847-674-0000 and we will match a unit to your bays.
